MEK-PM
GRIP GmbH Handhabungstechnik Tel.: 0231/96450-01 www.grip-gmbh.com info@grip-gmbh.com
MBA-MEK-PM-EN
07/2019
Assembly and Operating
Manual
6
10 EC-Declaration of incorporation
according to the Machinery Directive 2006/42/EC
The producer / distributor
GRIP GmbH Handhabungstechnik
Alter Hellweg 70
D-44379 Dortmund
hereby declares that the following products
Product designation:
Multi energy coupling (MEK-PM)
Functional description :
Component for carrying compressed air and electrical signals
Type designation:
G-
MEK…PM5
-1E
…
The provisions of the above-mentioned directives -including their effective amendments-
comply with the time of the declaration.
He further states that the following essential requirements of the Machinery Directive
2006/42/EG were applied and observed: annex I, numerics: 1.1.2; 1.1.3; 1.1.5; 1.3.2; 1.7.4
He further states that the specific technical documentation has been drawn up in accordance
with annex VII, Part B.
The following harmonized standard has been applied:
EN ISO 12100:2010
Safety of machinery - General principles for design -
Risk assessment and risk reduction
In the case of reasoned requests, the specific documents shall be sent to the national authorities
as follows: Post
The product mentioned above may only be put into operation if it has been established
applicable that the unit, into which the above-mentioned product is to be incorporated,
complies with the provisions of the Machinery Directive 2006/42 / EC.
Authorized representative Dipl.-Ing. (FH) Hasan Canti
Location:
Dortmund
Date:
30.01.2018
_____________________________
Dipl.-Ing. (FH) Hasan Canti
Executive Director
