53
GB
of the power tool for operations differ
-
ent from those intended could result in
a hazardous situation.
5) SERVICE
• Have your power tool serviced by
a qualified repair person using
only identical replacement parts.
This will ensure that the safety of the
power tool is maintained.
Further safety directions
Familiarise yourself with all the
unit’s parts and correct operation
of the unit before you start working
with it. Make sure that you can im-
mediately switch off the unit in an
emergency. Improper use of the
unit may lead to serious injury.
• The device must not be operated by
children. Laws and local regulations
can determine a minimum age for
use. Likewise, working with the device
should never be allowed for persons
who are not completely familiar with
the operating instructions.
• Pay attention to open windows, chil-
dren, pets, etc. Stop working if children
and pets are nearby. The blown mate
-
rial may fly in their direction. Maintain a
safety distance around you of 5 m.
• Do not turn on the device if it is upside
down or is not in working position.
• Do not point the device when it is work
-
ing at persons, in particular, do not
point the airstream at eyes and ears.
• Make yourself familiar with your sur-
roundings and pay attention to pos-
sible dangers which, under certain
circumstances, can be missed while
working.
• While working, make sure that you are
standing in a firm position – especially
when you are on a slope.
• Walk at a steady pace, do not run.
• Carefully inspect the surface to be
cleaned and remove all wires, stones,
cans and other foreign bodies.
• Keep fingers and feet away from the
suction tube opening and impeller
wheel. There is a danger of injury.
• Employ the device in a completely as-
sembled condition only.
• Only use the replacement parts that
are supplied and recommended by
our Service Centre.
•
Turn off the device and remove the
battery:
- when you are not using the device,
transporting it or leaving it unat-
tended;
- when you are carrying out cleaning
or maintenance work or replacing
accessories;
- after contact with foreign bodies or
in case of abnormal vibration;
• Keep all cooling air inlets clear of dirt.
Assembling instructions
Do not insert the battery until
the appliance is fully assembled.
Risk of injury!
Unit assembly:
Slide the blower pipe (1) onto the connec-
tor nozzle (2) on the motor housing (4)
until it locks into place. In order to attach
the blower pipe (1), the locking button (3)
must be pressed down. There is a distinct,
audible clicking sound when the blower
pipe has attached to the locking button.
Summary of Contents for ALB 2020 Lion Set
