91
GB
Storage
General Storage Instructions
Do not store the equipment
with a full collection box. In hot
weather, the grass begins to fer-
ment when heat is generated.
Risk of fire.
• Clean and service the equipment be-
fore storage.
• Allow the engine to cool before storing
the equipment in enclosed areas.
• Use suitable and authorised contain-
ers for storing fuel.
• Keep the equipment in a dry place
that is protected from dust and out of
reach of children.
• For space-saving storage, the upper
handle bar can be folded down (see
small image ) Release the quick-re-
lease lever and fold down the handle
bar so the equipment takes up less
space. The Bowden cables must not
be squashed when doing this.
• Do not wrap the equipment in nylon
bags as damp and mould could form
Storage During Longer Breaks
from Operation
Non-observance of the storage
instructions may cause starting
problems or permanent damage
as a result of fuel residues in the
carburettor.
• Empty petrol tank in a well-ventilated
place.
• Empty carburettor: For this purpose,
start motor and leave it running until
the motor stops. Let motor cool down.
• Change the oil (see “changing the en-
gine oil“).
• Preserve the engine:
- Unscrew the spark plug (see “clean-
ing and maintenance“ - Change/
adjust spark plug;
- Pour a tablespoon of engine oil
through the spark plug hole into the
engine compartment;
- Pull the starter cord slowly several
times with the safety catch pulled in
order to distribute the oil inside the
engine;
- Screw the spark plug tight.
• Dispose of used oil and petrol resi-
dues in an ecofriendly manner (see
“disposal / environmental protection“).
There is no need to drain the petrol
tank if a fuel stabiliser is added to
the petrol.
Disposal / Environmental
Protection
• Return the tool, accessories and
packaging to a recycling centre when
you have finished with them.
- Carefully drain the petrol and oil
tanks and take your equipment to
a recycling centre. The plastic and
metal parts that are used can be
separated by type and thus recycled.
- Take used oil and petrol residues
to a disposal point and do not pour
them into the sewer system or down
the drain.
- Please contact your Grizzly Tools
dealer.
• Defective units returned to us will be
disposed of for free.
• Do not throw cut grass in the dust-
bin but rather compost it or spread it
under bushes and trees as a mulch
layer.
Summary of Contents for BRM 46-144 A-OHV
