background image

grizzly industrial, inc. warrants every product it sells for a period of 

1 year to the original 

purchaser from the date of purchase. this warranty does not apply to defects due directly 
or  indirectly  to  misuse,  abuse,  negligence,  accidents,  repairs  or  alterations  or  lack  of 
maintenance.  this  is  grizzly’s  sole  written  warranty  and  any  and  all  warranties  that  may 
be implied by law, including any merchantability or fitness, for any particular purpose, are 
hereby limited to the duration of this written warranty. We do not warrant or represent that 
the merchandise complies with the provisions of any law or acts unless the manufacturer so 
warrants. in no event shall grizzly’s liability under this warranty exceed the purchase price 
paid for the product and any legal actions brought against grizzly shall be tried in the State 
of Washington, County of Whatcom.

We shall in no event be liable for death, injuries to persons or property or for incidental, 
contingent, special, or consequential damages arising from the use of our products.

to take advantage of this warranty, contact us by mail or phone and give us all the details. 
We will then issue you a “return authorization number,” which must be clearly posted on 
the outside as well as the inside of the carton. We will not accept any item back without this 
number. proof of purchase must accompany the merchandise. 

the  manufacturers  reserve  the  right  to  change  specifications  at  any  time  because  they 
constantly strive to achieve better quality equipment. We make every effort to ensure that 
our  products  meet  high  quality  and  durability  standards  and  we  hope  you  never  need  to 
use this warranty.

please  feel  free  to  write  or  call  us  if  you  have  any  questions  about  the  machine  or  the 
manual. 

grizzly industrial, inc.

1203 lycoming mall circle

muncy, pa 17756

phone: (570) 546-9663

fax: (800) 438-5901

e-mail:

 techsupport@grizzly.com

Web site: http://www.grizzly.com

thank  you  again  for  your  business  and  continued  support.  We  hope  to  serve  you  again 
soon!

Warranty and returns

Summary of Contents for 1 1/4" Brad Nailer T20568





















Reviews: