t20568 1
1
⁄
4
" brad nailer
-4
-
introduction
if you have any comments regarding this
manual, please write to us at the following
address:
grizzly industrial, inc.
C/o technical documentation manager
p.o. box 2069
bellingham, Wa 98227-2069
email: manuals@grizzly.com
most importantly, we stand behind our
tools. if you have any service questions or
parts requests, please call or write us at
the location listed below.
grizzly industrial, inc.
1203 lycoming mall Circle
muncy, pa 17756
phone: (570) 546-9663
Fax: (800) 438-5901
e-mail: techsupport@grizzly.com
Web Site: http://www.grizzly.com
We are proud to offer this manual with
your new machine! We've made every
effort to be exact with the instructions,
specifications, drawings, and photographs
of the machine we used when writing this
manual. however, sometimes errors do
happen and we apologize for them.
also, owing to our policy of continuous
improvement, your machine may not
exactly match the manual. if you find this
to be the case, and the difference between
the manual and machine leaves you in
doubt, immediately call our technical sup-
port for updates or clarification.
For your convenience, we always keep
current grizzly manuals and most updates
available on our website at www.grizzly.
com. any updates to your machine will be
reflected in these documents as soon as
they are complete. Visit our site often to
check for the latest updates!
manual accuracy
contact info
machine data
nail Size ......................................18 gauge
nail length ....................................
3
/
8
"–1¼"
magazine Capacity ...................... 100 nails
air inlet ...........................................¼" npt
Weight .............................................3¼ lbs.
operating pressure .................. 60-100 pSi
