MODEL G0490
8" JOINTER
MANUAL UPDATE
COPYRIGHT © APRIL, 2006 BY GRIZZLY INDUSTRIAL, INC.
WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE
OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.
#TR8163 PRINTED IN CHINA
Improvements to this machine were made since the manual was originally printed. This update covers those
changes. Keep this update with your Owner's Manual in case you ever need to refer to it.
If you have ques-
tions, contact Tech Support at (570) 546-9663 or by email at techsupport@grizzly.com.
Improved Shipping Setup
The motor is now securely bolted to the inside of
the stand for shipping purposes.
Before Assembly
Before mounting the jointer on the stand, the
motor must be removed from its shipping posi-
tion (
Figure 1
) and installed on the motor mounts
(
Figure 2
). The remaining setup instructions are
covered in the owner's manual.
To install the motor on the motor mounts:
1.
Turn the stand upside down and unbolt the
motor from the stand.
2.
Use the fasteners that attach the motor to
the stand to attach it to the motor mounts, as
shown in
Figure 2
.
Figure 1.
Motor as shipped.
Figure 2.
Motor installed on motor mounts.
Summary of Contents for G0490
