G0532 2HP Dry Spray Booth
-11-
Inventory
In the event that any nonproprietary parts are
missing (e.g. a nut or a washer), we would be
glad to replace them, or for the sake of expedi-
ency, replacements can be obtained at your local
hardware store.
Figure 2.
Model G0532 Inventory.
After all the parts have been removed from the
carton, you should have the following items:
Box 1 (Figure 2)
Qty
A.
Exhaust Fan ............................................... 1
B.
Left Curtain ................................................. 1
C.
Right Curtain .............................................. 1
D.
Work Table ................................................. 1
E.
Long Leg Supports ..................................... 2
F.
Short Leg Supports .................................... 2
G.
Upper and Lower Skew Boards ................. 2
H
. Right and Left Skew Boards ...................... 2
I.
Outlet .......................................................... 1
J.
Air Filter Indicator (Manometer) ................. 1
K.
Large Braces .............................................. 4
L.
Top Curtain ................................................. 1
M.
Small Braces .............................................. 4
N.
Legs ............................................................ 4
O.
Middle Brace .............................................. 1
P.
Second Stage Filter ................................... 4
Q.
First Stage Filter ......................................... 4
R.
Third Stage Filter ....................................... 1
S.
Curtain Braces (Not Shown) ...................... 2
Hardware and Tools (Not Shown)
• Hex Bolts
3
⁄
8
"-16 x
3
⁄
4
" (Stand) .................... 32
• Flat Washers
3
⁄
8
" (Stand) ............................ 64
• Hex Nuts
3
⁄
8
"-16 (Stand) ............................. 32
• Swivel Casters (Stand) ................................. 2
• Fixed Casters (Stand) ................................... 2
• Hex Nuts
5
⁄
16
"-18 (Stand, Skew Boards) ..... 25
• Hex Bolts
5
⁄
16
"-18 x
3
⁄
4
"
(Stand, Skew Boards, Outlet) ..................... 35
• Flat Washers
5
⁄
16
" (Stand, Skw Bd, Outlet) 60
• Flat Hd Screws
1
⁄
4
"-20 x
5
⁄
8
"
(Skew Boards, Work Table, Curtains) ......... 36
• Hex Nuts
1
⁄
4
"-20
(Skew Boards, Work Table, Curtains) ........ 60
• Flat Washers
1
⁄
4
"
(Skew Boards, Work Table, Curtains) ........ 84
• Hex Bolts
1
⁄
4
"-20 x
1
⁄
2
" (Skew Boards) ........ 24
• Tubing (Manometer) ..................................... 2
• Tubing Connector Fitting (Manometer) ......... 1
• Plastic Clip (Manometer) .............................. 1
• Tap Screw M4 x 12 (Manometer) ................. 1
• Tap Screws M4 x 45 (Manometer) ............... 2
• Red Gauge Oil (Manometer) ......................... 1
• Outlet Gasket (Outlet) ................................... 1
• Arrow Labels (Red and Green) ..................... 2
A
B
C
D
H
M
K
G
J
I
O
P
Q
N
E
F
L
R
NOTICE:
Some parts listed in the inventory may
already be installed on the machine. Check the
machine before assuming parts are missing.
Summary of Contents for G0532
