manualshive.com logo in svg

Grizzly G0657, Owner'S Manual

The Grizzly G0657 Owner's Manual is a comprehensive guide that ensures a seamless user experience with the Grizzly G0657 model. This manual offers step-by-step instructions, troubleshooting tips, and maintenance guidelines. Access this indispensable resource for free download at 88.208.23.73:8080, unlocking maximum potential for your woodworking ventures.

Share
Download
background image

-4-

 Models G0657/G0658 (Mfg. Since 5/13)

The information contained herein is deemed accurate as of 9/2/2013 and represents our most recent product specifications.

Due to our ongoing improvement efforts, this information may not accurately describe items previously purchased.

PAGE 1 OF 2

Model G0657

MACHINE DATA

SHEET

Customer Service #: (570) 546-9663 · To Order Call: (800) 523-4777 · Fax #: (800) 438-5901

MODEL G0657 10 X 16 HEAVY-DUTY BENCH-TOP WOOD

LATHE

Product Dimensions:

Weight................................................................................................................................................................ 79 lbs.

Width (side-to-side) x Depth (front-to-back) x Height..................................................................... 36 x 13-1/2 x 12 in.

Footprint (Length x Width)................................................................................................................. 7-3/4 x 31-1/2 in.

Shipping Dimensions:

Type..................................................................................................................................................... Cardboard Box

Content........................................................................................................................................................... Machine

Weight................................................................................................................................................................ 90 lbs.

Length x Width x Height....................................................................................................................... 35 x 15 x 16 in.

Must Ship Upright.................................................................................................................................................... No

Electrical:

Power Requirement........................................................................................................... 110V, Single-Phase, 60 Hz

Prewired Voltage.................................................................................................................................................. 110V

Full-Load Current Rating....................................................................................................................................... 2.5A

Minimum Circuit Size.............................................................................................................................................. 15A

Connection Type....................................................................................................................................... Cord & Plug

Power Cord Included.............................................................................................................................................. Yes

Power Cord Length................................................................................................................................................. 6 ft.

Power Cord Gauge......................................................................................................................................... 16 AWG

Plug Included.......................................................................................................................................................... Yes

Included Plug Type................................................................................................................................................ 5-15

Switch Type.................................................................................................. Paddle Safety Switch w/Removable Key

Motors:

Main

Type.............................................................................................................................................. Universal DC

Horsepower............................................................................................................................................. 1/2 HP

Phase............................................................................................................................................ Single-Phase

Amps........................................................................................................................................................... 2.5A

Speed................................................................................................................................................ 2500 RPM

Power Transfer .................................................................................................................................. Belt Drive

Bearings..................................................................................................... Shielded & Permanently Lubricated

Main Specifications:

Operation Information

Swing Over Bed......................................................................................................................................... 10 in.

Dist Between Centers................................................................................................................................ 16 in.

Swing Over Tool Rest.................................................................................................................................. 7 in.

Swing Over Tool Rest Base.................................................................................................................. 7-1/4 in.

No of Spindle Speeds....................................................................................................................................... 3

Spindle Speed Range.............................................................................................................. 300 – 3600 RPM

Floor to Center Height......................................................................................................................... 11-1/2 in.

Summary of Contents for G0657





















































Reviews:

No comments

Related manuals for G0657

Omax ProtoMax Quick Installation Overview preview
ProtoMax
Brand: Omax Pages: 2
Craftsman 351.217150 Operator'S Manual preview
351.217150
Brand: Craftsman Pages: 52
Hardinge T-42 Installation And Extended Storage Instructions preview
T-42
Brand: Hardinge Pages: 86
tornos 199222-0017 Installation Manual preview
199222-0017
Brand: tornos Pages: 24
Record Power DML250 Original Instructions Manual preview
DML250
Brand: Record Power Pages: 36
Woodstock Shop Fox M1112 Owner'S Manual preview
Shop Fox M1112
Brand: Woodstock Pages: 84
The Beall Tool Company The Lathe Wizard Setting Up preview
The Lathe Wizard
Brand: The Beall Tool Company Pages: 4

Brands by name

Popular brands

Load more brands