manualshive.com logo in svg

Grizzly G0657, Owner'S Manual

The Grizzly G0657 Owner's Manual is a comprehensive guide that ensures a seamless user experience with the Grizzly G0657 model. This manual offers step-by-step instructions, troubleshooting tips, and maintenance guidelines. Access this indispensable resource for free download at 88.208.23.73:8080, unlocking maximum potential for your woodworking ventures.

Share
Download
background image

 Models G0657/G0658 (Mfg. Since 5/13)

-7-

The information contained herein is deemed accurate as of 9/2/2013 and represents our most recent product specifications.

Due to our ongoing improvement efforts, this information may not accurately describe items previously purchased.

PAGE 2 OF 2

Model G0658

Spindle Information

Spindle Taper............................................................................................................................................ MT#2

Spindle Thread Size.................................................................................................................................... 1 in.

Spindle TPI................................................................................................................................................ 8 TPI

Spindle Thread Direction.................................................................................................................. Right Hand

Spindle Bore......................................................................................................................................... 0.433 in.

Type of Included Spindle Center................................................................................................................. Spur

Outboard Spindle Thread Direction.................................................................................................... Left Hand

Outboard Spindle Size.............................................................................................................................. 3/4 in.

Outboard Spindle TPI.............................................................................................................................. 16 TPI

Tool Rest Information

Tool Rest Width................................................................................................................................... 6-1/16 in.

Tool Rest Post Diameter........................................................................................................................... 5/8 in.

Tool Rest Post Length........................................................................................................................... 3-5/8 in.

Tool Rest Base Height......................................................................................................................... 1-7/16 in.

Tailstock Information

Tailstock Taper.......................................................................................................................................... MT#2

Type of Included Tailstock Center............................................................................................................... Live

Construction

Bed.......................................................................................................................... Precision-Ground Cast Iron

Headstock............................................................................................................................... Cast Iron & Steel

Tailstock.................................................................................................................................. Cast Iron & Steel

Paint....................................................................................................................................................... Enamel

Other Related Information

Bed Width.............................................................................................................................................. 7-7/8 in.

Faceplate Size........................................................................................................................................ 3.15 in.

Other Specifications:

Country Of Origin ............................................................................................................................................. Taiwan

Warranty ........................................................................................................................................................... 1 Year

Approximate Assembly & Setup Time ........................................................................................................ 30 Minutes

Serial Number Location ........................................................................................................... ID Label on Lathe Bed

ISO 9001 Factory .................................................................................................................................................... No

CSA Certified ......................................................................................................................................................... Yes

Summary of Contents for G0657





















































Reviews:

No comments

Related manuals for G0657

Jet ZH Series Operation And Maintenance Instructions preview
ZH Series
Brand: Jet Pages: 104
Record Power MAXI-1 Original Instruction Manual preview
MAXI-1
Brand: Record Power Pages: 28
Jet JWL-1015 Operating Instructions Manual preview
JWL-1015
Brand: Jet Pages: 40
WABECO D6000 Operating Instructions Manual preview
D6000
Brand: WABECO Pages: 168
laguna 151-1216 Operating Instructions Manual preview
151-1216
Brand: laguna Pages: 20
The Beall Tool Company The Lathe Wizard Setting Up preview
The Lathe Wizard
Brand: The Beall Tool Company Pages: 4
KENT USA KTM-VH500EVS Operation Manual preview
KTM-VH500EVS
Brand: KENT USA Pages: 74

Brands by name

Popular brands

Load more brands