-20-
Model G0671/G0672/G0673 (Mfd. Since 6/17)
G0671/G0672
Inventory
Contents (Figures 3 & 4)
Qty
A. Collectors ................................................... 2
B. Impeller Housing with Motor ....................... 1
C. Casters ....................................................... 4
D. Leg Braces ................................................. 4
E. Combo Wrench 10 x 12mm ........................ 1
F. Legs ............................................................ 4
G. Gaskets ...................................................... 2
H. 4-in-1 Inlet Adapter ..................................... 1
I. Hangers ...................................................... 2
J. Hanger Supports ........................................ 2
K. Lower Collection Bags (Plastic) .................. 2
L. Upper Filter Bags (Fabric) .......................... 2
Fasteners (where used) (not shown)
Qty
•
Hex Bolts
5
⁄
16
"-18 x 2
1
⁄
2
" (legs) .................... 8
•
Hex Nuts
5
⁄
16
"-18 (legs/collectors) ............. 24
•
Hex Bolts
5
⁄
16
"-18 x
1
⁄
2
" (leg braces) .......... 16
•
Hex Bolts
5
⁄
16
"-18 x 1" (collectors) ............. 16
•
Hex Bolts
1
⁄
4
"-20 x
1
⁄
2
" (hangers) ................. 6
•
Flat Washers
5
⁄
16
" (collectors) .................. 32
•
Phillips Head Screw 10-24 X
3
⁄
8
" (inlet) ...... 1
•
Bag Clamps (bags) ..................................... 4
Figure 3.
G0671/G0672 Inventory 1.
D
C
A
B
E
Figure 4. G0671/G0672 Inventory 2.
G
H
I
J
K
L
NOTICE
If you cannot find an item on this list, care-
fully check around/inside the machine and
packaging materials. Often, these items get
lost in packaging materials while unpack-
ing or they are pre-installed at the factory.
The following is a list of items shipped with your
machine. Before beginning setup, lay these items
out and inventory them.
If any non-proprietary parts are missing (e.g. a
nut or a washer), we will gladly replace them; or
for the sake of expediency, replacements can be
obtained at your local hardware store.
F
