-26-
Model G0792 (Mfd. Since 12/15)
Machine Operation
Symptom
Possible Cause
Possible Solution
Workpiece deforms,
kinks, or is crushed
during operation.
1. Excessive bending pressure.
2. Roller profile not compatible with workpiece
shape.
1. Reduce bending pressure of upper roller.
2. Use workpiece suitable for bending operation; use
correct rollers for shape of workpiece.
Workpiece does not
move when rollers
rotate.
1. Not enough bending pressure.
2. Grease/oil on workpiece/rollers, causing
rollers to slip against workpiece.
1. Increase bending pressure of upper roller.
2. Thoroughly clean workpiece/rollers to prevent
slipping.
Summary of Contents for G0792
Page 44: ......