-4-
Model G0803Z (Mfd. Since 12/18)
Controls &
Components
Refer to
Figures 1–5 and the following descrip-
tions to become familiar with the basic controls
and components of this machine. Understanding
these items and how they work will help you
understand the rest of the manual and stay safe
when operating this machine.
To reduce your risk of
serious injury, read this
entire manual BEFORE
using machine.
Guide Post
Fence & Miter Gauge
Figure 2. Fence and miter gauge controls.
A. Fence: Used for ripping, resawing, or cut-
ting tenons. Distance from blade determines
width of cut.
B. Miter Gauge: Used for cross cuts. Adjusts
60° left or right.
C. Miter Gauge Lock Knob: Secures angle
position of miter gauge.
D. Fence Lock Handle: Secures fence position.
D
Basic Controls & Components
Figure 1. Basic Controls & Components.
A. ON/OFF Paddle Switch w/Removable Key:
Turns machine
ON and OFF. Remove key to
disable machine.
B. Laser Sight w/ON/OFF Switch: Projects
down length of blade and onto workpiece to
help guide cut.
C. Chip Blower: Gently blows dust and debris
away from cutting area.
D. LED Worklamp w/ON/OFF Button:
Illuminates cutting area for better visibility.
A
B
C
D
A
B
C
Figure 3. Guide post controls.
E
G
F
E. Guide Post Adjustment Knob: Rotate
to adjust height of blade guides above
workpiece.
F. Upper Blade Guide: Supports blade above
workpiece during operations.
G. Guide Post Lock Knob: Secures height of
blade guides.
Summary of Contents for G0803Z
Page 60: ......
