Model G0812 (Mfd. Since 2/16)
-49-
Items Needed
Qty
10-Gallon Drain Pan .......................................... 1
Hex Wrench 8mm .............................................. 1
Disposable Rags ............................... As Needed
To change coolant:
1. DISCONNECT MACHINE FROM POWER!
2. Remove chip collection drawer (see
Figure 79) from coolant tank.
3. Remove drain plug (see Figure 79), empty
tank contents into drain pan, and dispose of
fluid following federal, state, and fluid manu-
facturer requirements.
Changing Coolant
4. Thoroughly clean tank, pump with hot, soapy
water and dry.
5. Re-install drain plug, then refill tank with cool-
ant (refer to
Adding Coolant on Page 48).
6. Replace chip collection drawer.
Figure 79. Coolant drain plug location.
Drain Plug
Chip
Collection
Drawer
Summary of Contents for G0812
Page 84: ......
