Model G0825 (Mfd. Since 02/17)
-15-
Site Considerations
Figure 7. Machine clearances.
25
1
/
2
"
14"
Consider anticipated workpiece sizes and addi-
tional space needed for auxiliary stands, work
tables, or other machinery when establishing a
location for this machine in the shop. Below is
the minimum amount of space needed for the
machine.
Placement Location
Assembly
Assembling the Model G0825 requires connect-
ing the coil support and attaching the guide plate.
See
Page 25 for details on mounting edgebander
to a fixed work table.
To assemble machine:
1. Attach coil support to machine by fitting coil
support around infeed channel and tighten-
ing cam locks (see
Figure 8).
The machine must be fully assembled before it
can be operated. Before beginning the assembly
process, refer to
Needed for Setup and gather
all listed items.
2. Insert guide plate shaft into housing, and
attach with lock lever (see
Figure 9).
Guide Plate
Shaft
Figure 9.
Attaching guide plate.
Lock Lever
Guide Plate
Infeed
Channel
Figure 8.
Attaching coil support to machine.
Coil
Support
Cam
Locks
Summary of Contents for G0825
Page 44: ......