Model G0842 (Mfd. Since 04/18)
-9-
WEARiNG PROPER APPAREL. do not wear
clothing, apparel or jewelry that can become
entangled in moving parts. always tie back or
cover long hair. Wear non-slip footwear to reduce
risk of slipping and losing control or accidentally
contacting cutting tool or moving parts.
HAzARDOuS DuST. dust created by machinery
operations may cause cancer, birth defects, or
long-term respiratory damage. Be aware of dust
hazards associated with each workpiece mate-
rial. always wear a nioSh-approved respirator to
reduce your risk.
HEARiNG PROTECTiON. always wear hear-
ing protection when operating or observing loud
machinery. Extended exposure to this noise
without hearing protection can cause permanent
hearing loss.
REMOvE ADJuSTiNG TOOLS. tools left on
machinery can become dangerous projectiles
upon startup. never leave chuck keys, wrenches,
or any other tools on machine. always verify
removal before starting!
uSE CORRECT TOOL fOR THE JOb. only use
this tool for its intended purpose—do not force
it or an attachment to do a job for which it was
not designed. never make unapproved modifica-
tions—modifying tool or using it differently than
intended may result in malfunction or mechanical
failure that can lead to personal injury or death!
AWKWARD POSiTiONS. Keep proper footing
and balance at all times when operating machine.
do not overreach! avoid awkward hand positions
that make workpiece control difficult or increase
the risk of accidental injury.
CHiLDREN & bYSTANDERS. Keep children and
bystanders at a safe distance from the work area.
Stop using machine if they become a distraction.
GuARDS & COvERS. guards and covers reduce
accidental contact with moving parts or flying
debris. Make sure they are properly installed,
undamaged, and working correctly BEForE
operating machine.
fORCiNG MACHiNERY. do not force machine.
it will do the job safer and better at the rate for
which it was designed.
NEvER STAND ON MACHiNE. Serious injury
may occur if machine is tipped or if the cutting
tool is unintentionally contacted.
STAbLE MACHiNE. unexpected movement dur-
ing operation greatly increases risk of injury or
loss of control. Before starting, verify machine is
stable and mobile base (if used) is locked.
uSE RECOMMENDED ACCESSORiES. Consult
this owner’s manual or the manufacturer for rec-
ommended accessories. using improper acces-
sories will increase the risk of serious injury.
uNATTENDED OPERATiON. to reduce the
risk of accidental injury, turn machine
OFF and
ensure all moving parts completely stop before
walking away. never leave machine running
while unattended.
MAiNTAiN WiTH CARE. Follow all maintenance
instructions and lubrication schedules to keep
machine in good working condition. a machine
that is improperly maintained could malfunction,
leading to serious personal injury or death.
DAMAGED PARTS. regularly inspect machine
for damaged, loose, or mis-adjusted parts—or
any condition that could affect safe operation.
immediately repair/replace BEForE operating
machine. For your own safety, do not operate
machine with damaged parts!
MAiNTAiN POWER CORDS. When disconnect-
ing cord-connected machines from power, grab
and pull the plug—not the cord. pulling the cord
may damage the wires inside. do not handle
cord/plug with wet hands. avoid cord damage by
keeping it away from heated surfaces, high traffic
areas, harsh chemicals, and wet/damp locations.
EXPERiENCiNG DiffiCuLTiES. if at any time
you experience difficulties performing the intend-
ed operation, stop using the machine! Contact our
technical Support at (570) 546-9663.
Summary of Contents for G0842
Page 56: ......
