-34-
Model G0887 (Mfd. Since 01/19)
5. Clean out all chips and shavings with a brush
and shop vacuum.
6. Remove both blade guards and blade guard
extension by removing (6) button head cap
screws and flat washers (see
Figure 29).
7. Release blade tension by turning blade
tension handwheel counterclockwise (see
Figure 30).
Figure 29. Location of blade guards and blade
guard extension.
Figure 30. Location of blade tension handwheel.
Blade
Tension
Handwheel
Right Blade
Guard
x 2
Left Blade
Guard
Blade Guard
Extension
x 2
Changing Blade
All saw blades are danger-
ous and may cause per-
sonal injury. To reduce
the risk of being injured,
wear leather gloves when
handling and uncoiling saw
blades.
Item(s) Needed
Qty
Assistant ............................................................ 1
Leather Gloves (per person) .............................. 1
Hex Wrench 4mm .............................................. 1
Blades should be changed when they become
dull, damaged, or when cutting materials that
require a blade of a certain type or tooth count.
To change blade:
1. Push hydraulic pump button ( ) to turn
hydraulic pump
ON.
2. Push raise headstock button (
) and raise
headstock approximately 6 inches.
3. DISCONNECT MACHINE FROM POWER!
4. Open wheel cover by removing (4) button
head cap screws (see
Figure 28).
Figure 28. Blade cover secure screws (2 of 4).
x 2
Summary of Contents for G0887
Page 108: ......
