Figure 42. Example of Udisk+ screen.
Figure 40. Example of status screen.
Figure 41. Example of file management screen.
-36-
Model G0911–G0914 (Mfd. Since 05/21)
6. Screen will display files currently on USB
flash drive (see
Figure 42).
2. When machine startup is completed, status
screen will be displayed (see
Figure 40).
Note: If a .RD file has been previously
loaded, it will be displayed as a numeral (e.g.
"File: 01"), and show any attributes assigned
to that file.
3. Insert USB flash drive into USB port on
machine.
4. Press File button on control panel to display
file management screen (see
Figure 41).
5. Use arrow nav buttons on control panel to
select "Udisk+", then press Enter.
7. Use up and down arrow nav buttons
( and
) on control panel to highlight
desired file, and use left and right arrow
nav buttons (
and
) to select "Copy to
memory", then press Enter.
8. Once file transfer message is displayed,
press Esc button to return to status screen.
File is now ready for laser operations.
Loading .RD File From Machine
Memory
1. Turn machine ON and wait for startup proce-
dure to complete.
2. When machine startup is completed, status
screen will be displayed (see
Figure 40).
Note: If a .RD file has been previously
loaded, it will be displayed as a numeral (e.g.
"File: 01"), and show any attributes assigned
to that file.
3. Press File button on control panel to display
file management screen (see
Figure 41).
4. Use up and down arrow nav buttons
( and
) on control panel to highlight
desired file, and use left and right arrow nav
buttons (
and
) to select "Read mem
file", then press Enter.
5. Once file transfer message is displayed, press
Esc button to return to status screen. File is
now loaded and ready for laser operations.
Summary of Contents for G0911
Page 100: ......