Model G0948 (Mfd. Since 08/21)
-47-
SECTION 6: MAINTENANCE
To reduce risk of shock or
accidental startup, always
disconnect machine from
power before adjustments,
maintenance, or service.
For optimum performance from this machine, this
maintenance schedule must be strictly followed.
Ongoing
To minimize your risk of injury and maintain proper
machine operation, shut down the machine imme-
diately if you ever observe any of the items below,
and fix the problem before continuing operations:
•
Loose mounting bolts.
•
Damaged saw blade.
•
Worn or damaged wires.
•
Any other unsafe condition.
Monthly
•
Check belt for tension, damage, or wear.
•
Remove blade and thoroughly clean all built-
up sawdust from the rubber tires on the
wheels.
•
Clean/vacuum dust buildup from inside cabi-
net and off motor.
Schedule
Cleaning &
Lubricating
Vacuum excess wood chips and sawdust, and
wipe off the remaining dust with a dry cloth. If
resin has built up, use a resin dissolving cleaner
to remove it.
Once a month, remove the blade and thoroughly
clean all built-up sawdust from the rubber tires on
the wheels.
If the table becomes difficult to tilt, lubricate the
surfaces between the trunnions and the trunnion
bracket with a dry lubricant (see
Figure 65).
Figure 65. Model G4682 Dry Coating Lube.
Summary of Contents for G0948
Page 68: ......
