-4-
Model G0949G (Mfd. Since 01/22)
Controls &
Components
Refer to
Figures 1-6 and the following descrip-
tions to become familiar with the basic controls of
this lathe.
Many of the controls will be explained in greater
detail later in this manual.
Headstock
A. Spindle Speed Digital Readout: Shows
spindle speed RPM.
B. Spindle Speed Dial: Turn clockwise to
increase spindle speed. Turn counterclock-
wise to decrease spindle speed.
C. Spindle Speed Range Lever: Selects one of
two spindle speed ranges.
D. START Button: Starts spindle rotation.
Illuminates when power is
ON.
E. FWD/REV Switch: Once spindle has come to
a complete stop, move switch to FWD posi-
tion for counterclockwise rotation (forward).
Move switch to REV position for clockwise
rotation (reverse). Move switch to "0" position
to stop spindle rotation.
F. STOP Button: Stops spindle rotation.
G. Quick-Change Gearbox Levers: Controls
leadscrew and feed rod speeds for threading
and feeding operations.
H. E-Stop Button: Stops all machine functions.
Twist clockwise to reset.
I. Thread and Feed Charts: Display necessary
configuration of gearbox dials and end gears
for threading or feeding options.
Master Power Switch
To reduce your risk of
serious injury, read this
entire manual BEFORE
using machine.
The rotary switch shown in
Figure 1 toggles
incoming power ON and OFF to the lathe controls.
Master
Power
Switch
E-Stop
Button
Spindle
Speed
Dial
FWD/REV
Switch
A
H
G
I
F
B
C
D
E
Figure 1. Master power switch location.
Figure 2. Headstock controls.
Summary of Contents for G0949G
Page 108: ......
