Model G1014Z/G1014ZX (Mfd. Since 08/22)
-15-
SECTION 3: SETUP
Needed for Setup
This machine and its com-
ponents are very heavy.
Get lifting help or use
power lifting equipment
such as a forklift to move
heavy items.
This machine presents
serious injury hazards
to untrained users. Read
through this entire manu-
al to become familiar with
the controls and opera-
tions before starting the
machine!
Wear safety glasses during
the entire setup process!
No list of safety guidelines can be com-
plete. Every shop environment is different.
Always consider safety first, as it applies
to your individual working conditions. Use
this and other machinery with caution and
respect. Failure to do so could result in
serious personal injury, damage to equip-
ment, or poor work results.
Like all machinery there is potential danger
when operating this machine. Accidents
are frequently caused by lack of familiarity
or failure to pay attention. Use this machine
with respect and caution to decrease the
risk of operator injury. If normal safety pre-
cautions are overlooked or ignored, seri-
ous personal injury may occur.
The following items are needed, but not included,
for the setup/assembly of this machine.
This machine was carefully packaged for safe
transport. When unpacking, separate all enclosed
items from packaging materials and inspect them
for shipping damage.
If items are damaged,
please call us immediately at (570) 546-9663.
IMPORTANT: Save all packaging materials until
you are completely satisfied with the machine and
have resolved any issues between Grizzly or the
shipping agent. You MUST have the original pack-
aging to file a freight claim. It is also extremely
helpful if you need to return your machine later.
Unpacking
Description Qty
•
Safety Glasses ............................................ 1
•
Cleaner/Degreaser ...................... As Needed
•
Disposable Shop Rags ................ As Needed
•
Disposable Gloves ...................... As Needed
•
Additional People ........................................ 1
•
Open-End Wrench
1
⁄
2
",
9
⁄
16
" ...................1 Ea.
•
Level ............................................................ 1
•
Shims .......................................... As Needed
•
Phillips Head Screwdriver #2 ...................... 1
•
Ruler ............................................................ 1
•
Machinist's Square ...................................... 1
•
Wrench or Socket
3
⁄
8
",
7
⁄
16
" ....................1 Ea.
•
Dust Hose 2" .............................................. 1
•
Hose Clamps 2" .......................................... 2
•
Dust Hose 2
1
⁄
2
" ............................................ 1
•
Hose Clamps 2
1
⁄
2
" ....................................... 2
•
Hose Adapters 4" x 2", 4" x 2
1
⁄
2
" ...........1 Ea.
•
Dust Hoses 4" ............................................ 3
•
Hose Clamps 4" .......................................... 5
•
Hose Y-Fitting 4" x 4" x 4" ........................... 1
•
Dust Collector .............................................. 1
