Model G4000 (Mfg. Since 8/09)
-43-
SECTiON 5: ACCESSORiES
ACCEssoriEs
G1075—52-pC. Clamping Kit
All the blocks, bolts, nuts, and hold-downs are
case hardened. this clamping kit includes: 24
studs, 6 step block pairs, 6 t-nuts, 5 flange nuts,
4 coupling nuts, and 6 end hold-downs. the rack
can be bolted to the wall or side of the machine for
easy access. Features
1
⁄
2
" t-nuts &
3
⁄
8
" bolts.
figure 62. g1075 52-pC. Clamping Kit.
H7724—60" Birch Workbench w/Drawers
When organized storage is every bit as important
as a stable work surface, this workbench is just
what you need. includes six drawers with ball bear-
ing slides and two lower compartments. the end
vise also includes two bench dogs. specifications:
2
3
⁄
4
" top edge thickness; 60"W x 20"d x 34"h; 148
lbs. approximate shipping weight.
figure 63. h7724 60" Birch Workbench with
drawers.
Some aftermarket accessories can be
installed on this machine that could cause
it to function improperly, increasing the risk
of serious personal injury. To minimize this
risk, only install accessories recommended
for this machine by Grizzly.
NOTICE
Refer to the newest copy of the Grizzly
Catalog for other accessories available for
this machine.
SB1365—South Bend Lathe Way Oil, 12 oz.
T23962—iSO 68 Moly-D Machine Oil, 5 gal.
T23963—iSO 32 Moly-D Machine Oil, 5 gal.
Moly-d oils are some of the best we've found for
maintaining the critical components of machinery
because they tend to resist run-off and maintain
their lubricity under a variety of conditions—as
well as reduce chatter or slip. Buy in bulk and
save with 5-gallon quantities.
figure 61. 12 oz. way oil & 5 gallon machine oil.
sB1235
t23963