manualshive.com logo in svg

Grizzly G4003, Owner'S Manual

The Grizzly G4003 Owner's Manual is available for free download on our website. This comprehensive manual provides step-by-step instructions and valuable information for operating and maintaining the Grizzly G4003 product. Visit 88.208.23.73:8080 to easily download your manual and maximize your experience with the Grizzly G4003.

Share
Download
background image

Model G4003 (Mfd. Since 6/20)

-3-

The information contained herein is deemed accurate as of 3/4/2021 and represents our most recent product specifications.

Due to our ongoing improvement efforts, this information may not accurately describe items previously purchased.

PAGE 1 OF 3

Model G4003

MACHINE DATA

SHEET

Customer Service #: (570) 546-9663 · To Order Call: (800) 523-4777 · Fax #: (800) 438-5901

MODEL G4003 12" X 36" GEAR‐HEAD, CAM LOCK SPINDLE,

LATHE

Product Dimensions:

Weight.............................................................................................................................................................. 917 lbs.

Width (side-to-side) x Depth (front-to-back) x Height........................................................................... 61 x 23 x 23 in.

Footprint (Length x Width)............................................................................................................................ 61 x 23 in.

Shipping Dimensions:

Type.......................................................................................................................................................... Wood Crate

Content........................................................................................................................................................... Machine

Weight............................................................................................................................................................ 1020 lbs.

Length x Width x Height....................................................................................................................... 29 x 66 x 29 in.

Must Ship Upright................................................................................................................................................... Yes

Electrical:

Power Requirement........................................................................................................... 220V, Single-Phase, 60 Hz

Prewired Voltage.................................................................................................................................................. 220V

Full-Load Current Rating........................................................................................................................................ 12A

Minimum Circuit Size.............................................................................................................................................. 15A

Connection Type....................................................................................................................................... Cord & Plug

Power Cord Included............................................................................................................................................... No

Recommended Power Cord............................................................................... “S”-Type, 3-Wire, 14 AWG, 300 VAC

Plug Included........................................................................................................................................................... No

Recommended Plug Type..................................................................................................................................... 6-15

Switch Type............................................................................................ Control Panel w/Magnetic Switch Protection

Motors:

Main

Horsepower................................................................................................................................................ 2 HP

Phase............................................................................................................................................ Single-Phase

Amps........................................................................................................................................................... 8.5A

Speed................................................................................................................................................ 1725 RPM

Type................................................................................................................. TEFC Capacitor-Start Induction

Power Transfer .................................................................................................................................. Belt Drive

Bearings..................................................................................................... Shielded & Permanently Lubricated

Centrifugal Switch/Contacts Type.......................................................................................................... Internal

Main Specifications:

Operation Info

Swing Over Bed......................................................................................................................................... 12 in.

Distance Between Centers........................................................................................................................ 36 in.

Swing Over Cross Slide............................................................................................................................... 7 in.

Swing Over Saddle...................................................................................................................................... 7 in.

Maximum Tool Bit Size............................................................................................................................. 5/8 in.

Compound Travel.................................................................................................................................. 3-1/4 in.

Carriage Travel.................................................................................................................................... 30-1/2 in.

Cross Slide Travel................................................................................................................................. 6-1/4 in.

Summary of Contents for G4003





























































Reviews:

No comments

Related manuals for G4003

ADENDORFF MC900 Instruction Manual preview
MC900
Brand: ADENDORFF Pages: 18
Jet GH-2280ZX Brochure preview
GH-2280ZX
Brand: Jet Pages: 2
Laguna Tools CL1200 Manual preview
CL1200
Brand: Laguna Tools Pages: 45
Grizzly T10810 Instructions Manual preview
T10810
Brand: Grizzly Pages: 10
Wood-mizer Sawmill LT20 AC MH Series Safety, Setup, Operation & Maintenance Manual preview
Sawmill LT20 AC MH Series
Brand: Wood-mizer Pages: 106
KENT USA KTM-VH500EVS Operation Manual preview
KTM-VH500EVS
Brand: KENT USA Pages: 74
GRS 003-615 Manual preview
003-615
Brand: GRS Pages: 2
DoAll DC-330NC Instruction Manual preview
DC-330NC
Brand: DoAll Pages: 39
Climax BB5000 Setup & Operation preview
BB5000
Brand: Climax Pages: 14
Climax BB4500 Operating Manual preview
BB4500
Brand: Climax Pages: 162

Brands by name

Popular brands

Load more brands