5
©Alcor 2011 All rights reserved
SAFETY PRECAUTIONS
Only qualified, authorized adults should be allowed to operate this machine.
Read and understand all manuals and instructions before operating and servicing.
Inspect work area for holes, drop-offs or unstable ground. Know the weight limitation of operating surfaces and
clearances.
Make certain all controls and levers are in the neutral or “OFF” position before starting engine (Fig. #3, #5 and #6).
Operate the controls smoothly, do not make brisk movements.
Never back up without looking behind you.
Always bring the accessory flow lever to the “OFF” position before engaging or disengaging the accessory lever.
Then increase flow as desired. (Fig. 3, #6)
Do not allow people near the machine during operation.
Never carry or transport people in any circumstances.
Never operate a machine that is damaged in any way. Repairs or replacement of damaged components must be made
by a qualified mechanic.
Do not modify this machine. Do not operate a modified machine.
Wear safety footwear, eye and ear protection and snug fit clothing.
Operate the G41 only from the operator’s platform.
Always shut down G41 as in the “shut down procedure” before stepping down from the operator platform.
Always chock wheels when parking machine on a slope.
Always wear protective gear when operating and servicing this machine, machine will be hot and escaping oil can
burn and or penetrate skin.
Relieve hydraulic pressure before servicing hydraulics or using quick connectors.
Make certain all pins and bolts are used and secure.
Always use the cylinder lock if maintenance is required under the loader arms and or you want to keep the loader
arms up without being on the operator platform. (Fig. 10)
Never allow the G41 to be left alone with the engine running and or with the loader arms up if the cylinder lock is not
in place. (Fig. 10)
Keep children and pets at a safe distance at all times.
Keep hands, fingers and feet from moving parts at all times.
Operate the G41 on flat level ground as much as possible.
Stay alert and aware of your surroundings and stop operations if someone wanders to close to the machine.
Most parts of the G41 will be very hot while machine is in operation and after, keep from touching any hot part of it
and wear gloves.
Do not operate this machine if you are under the influence of alcohol, marijuana, or drugs that could impair your
judgment and ability.
Use extreme caution when handling fuel. Gasoline is very flammable. Shut off engine, allow to cool before
re-fuelling. Clean up spilled gasoline before restarting. (Fig. 12)
Never carry objects that may restrict or obstruct your vision.
On slopes, keep heavy end of loader uphill. (See operating precautions)
Travel up or down, never across slopes.
SAFETY PRECAUTIONS WHEN WORKING ON A ROOF
Please follow all previous precautions plus the following.
Check load limits of the deck with owner, contractor or architect before attempting to use the G41 on a roof.
Guard all openings on the roof.
Do not operate within 10 feet of roof edge (or within 6 feet, if operation is parallel to the edge).
Make certain OSHA requirements for safety equipment and handling of material are satisfied.
