Grizzly G8691 Instruction Manual Download

Page: 20 / 21

-19-

G8691 Wood Lathe w/ Stand

10.

Which benchtop tools do you own? Check all that apply.

___1" x 42" Belt Sander

___6" - 8" Grinder

___5" - 8" Drill Press

___Mini Lathe

___8" Table Saw

___10" - 12" Thickness Planer

___8" - 10" Bandsaw

___Scroll Saw

___Disc/Belt Sander

___Spindle/Belt Sander

___Mini Jointer

___Other__________________________________________________

11.

How many of the machines checked above are Grizzly? ____________

12.

Which portable/hand held power tools do you own? Check all that apply.

___Belt Sander

___Orbital Sander

___Biscuit Joiner

___Palm Sander

___Circular Saw

___Portable Planer

___Detail Sander

___Saber Saw

___Drill/Driver

___Reciprocating Saw

___Miter Saw

___Router

___Other__________________________________________________

13.

What machines/supplies would you like Grizzly Industrial to carry?

___12" Table Saw

___Radial Arm Saw

___12" Jointer

___Panel Saw

___Combination Planer/Jointer

___Brass Hardware

___Paint & Finishing Supplies

___Lumber

___Contractor’s Supplies

___Other__________________________________________________

14.

What new accessories would you like Grizzly Industrial to carry?

___Builders Hardware

___Hand Tools

___Fasteners ___Wood

Components

___Other__________________________________________________

15.

What other companies do you purchase your tools and supplies from?

__________________________________________________________

16.

Do you think your purchase represents good value?

___Yes

___No

17.

Would you recommend Grizzly Industrial to a friend?

___Yes

___No

18.

Would you allow us to use your name as a reference for Grizzly customers
in your area?

Note: We never use names more than three times.

___Yes

___No

19.

Comments:_________________________________________________

__________________________________________________________

How did you learn about us?

___Advertisement

___Friend

___Catalog

___Card Deck

___World Wide Web

___Other__________________________________________________

Which of the following magazines do you subscribe to.

___American Woodworker

___Practical Homeowner

___Cabinetmaker

___Shop Notes

___Family Handyman

___Today’s Homeowner

___Fine Homebuilding

___WOOD

___Fine Woodworking

___Wooden Boat

___Home Handyman

___Woodshop News

___Journal of Light Construction

___Woodsmith

___Old House Journal

___Woodwork

___Popular Mechanics

___Woodworker

___Popular Science

___Woodworker’s Journal

___Popular Woodworking

___Workbench

___Other__________________________________________________

Which of the following woodworking/remodeling shows do you watch?

___Backyard America

___The New Yankee Workshop

___Home Time

___This Old House

___The American Woodworker

___Woodwright’s Shop

___Other__________________________________________________

What is your annual household income?

___$20,000-$29,999

___$60,000-$69,999

___$30,000-$39,999

___$70,000-$79,999

___$40,000-$49,999

___$80,000-$89,999

___$50,000-$59,999

___$90,000 +

What is your age group?

___20-29

___50-59

___30-39

___60-69

___40-49

___70 +

How long have you been a woodworker?

___0 - 2 Years

___8 - 20 Years

___2 - 8 Years

___20+ Years

How would you rank your woodworking skills?

___Simple

___Advanced

___Intermediate

___Master Craftsman

What stationary woodworking tools do you own? Check all that apply.

___Air Compressor

___Panel Saw

___Band Saw

___Planer

___Drill Press

___Power Feeder

___Drum Sander

___Radial Arm Saw

___Dust Collector

___Shaper

___Horizontal Boring Machine

___Spindle Sander

___Jointer

___Table Saw

___Lathe

___Vacuum Veneer Press

___Mortiser

___Wide Belt Sander

___Other__________________________________________________

How many of your woodworking machines are Grizzly? _____________

Name

____________________________________________________________________________________

Street

____________________________________________________________________________________

City

______________________________________________________________State________Zip_________

Phone Number_______________________E-Mail_______________________FAX________________________

MODEL #

G8691 Wood Lathe w/ Stand

Order #______________________________________________

The following information is given on a voluntary basis. It will be used for marketing purposes to help us develop better products and services. Of

course, all information is strictly confidential.

WARRANTY CARD

Summary of Contents for G8691






















Search results

Summary of Contents for G8691

Reviews:

Related manuals for G8691

Brands by name

Popular brands

Grizzly G8691, Instruction Manual

Search results

Summary of Contents for G8691

Reviews:

Related manuals for G8691

Brands by name

Popular brands