Grizzly G9906, Instruction Manual

G9906 7

1

⁄

4

" Circular Saw

-7

-

Guidelines and Tips

Maintenance

OPERATING TIPS AND 

MAINTNENACE 

Before starting saw, insure the
wrench has been removed from the
arbor. If not removed, the wrench
could be propelled into the air and
may cause serious personal injury.

Avoid overloading the saw.

Always use

sharp saw blades. Do not apply

excessive pressure to the saw while

using. If the speed drops abnormally,

decrease pressure immediately. If

the blade stops abruptly or becomes

jammed, release the trigger at once.

Ensure the safety of the workplace.

Clear the work area of all parts and

debris that may cause injury by flying

objects. Securely fix the object to be

sawn in a vise or otherwise clamp to

avoid injury. Do not attempt to hold

workpiece by hand.

Inspect the saw before use.

Run the  saw

before using to ensure all parts are

running smoothly and there are no

abnormal sounds or sparks. If any

defect is found, have unit serviced.

Match your feed rate to the material.

Use a lower rate of feeding the saw

through the material when cutting

hard materials. In softer material

such as drywall or soft woods, you

can feed the saw faster.

Know your worksite. 

Only saw as deep

as necessary. Check behind walls for

for wires, other electrical hazards, or

plumbing.

Keep the saw free from dirt and grease.

Operating this equipment has the
potential to propel debris into the air
which can cause eye injury. Always
wear safety glasses or goggles when
operating equipment.  Be certain the
safety glasses you wear meet the
appropriate standards of the
American National Standards
Institute (ANSI).

Disassembly and improper reassem-
bly of this device can result in electri-
cal shock danger. Always have this
device serviced by an qualified elec-
trical repair technician. Serious injury
will result.