Grizzly G9907, Instruction Manual

G9907 Triangular Sander

-5

-

MAINTENANCE

General

Regular periodic maintenance on your

Model G9907 Triangular Sander will

ensure its optimum performance. Make a

habit of inspecting your sander each time

you use it. Check for the following condi-

tions and repair or replace when neces-

sary:

1.

Loose fasteners.

2.

Worn switch.

3.

Worn or damaged cords and

plugs.

4.

Worn or damaged sanding pad.

5.

Any other condition that could

hamper the safe operation of this

machine.

Keeping Tool Clean

Your G9907 Triangular Sander will give

you years of trouble free service if you

keep it clean and free of built-up dust or

grime. Ensure that no air passages get

blocked. If they do, blow them out with

compressed air. WARNING: Wear safety

glasses when cleaning tool with com-

pressed air. 

Plastic parts can easily be cleaned with a

damp cloth, but never use water to clean

any electrical parts. Solvents should also

be avoided on plastic because of the pos-

siblity of damage. 

If possible use a scraper to remove glue or

sap from your work; these elements may

hinder the effectiveness of the abrasive

sheets and cause unnecessary build-up of

grime on the sander.

Repair and Service

All quality tools will eventually wear from

normal use. Since sander is encased in a

double insulated plastic cover, leave repair

and service issues to a qualified service

technician. This includes brush replace-

ment, lubrication or any other internal

operation.

Disassembly and improper reassem-
bly of this device can result in elec-
trical shock danger. Always have this
device serviced by a qualified electri-
cal repair technician. Serious injury
will result.