Specifications
Air Inlet ....................................................
1
⁄
4
" NPT
Average Air Consumption ........................ 4 CFM
Operating Pressure .................................. 90 PSI
Capacity ................... 14 oz., (400cc bulk grease)
Weight ........................................3.2 lbs. (Empty)
Inventory (Figure 1) Qty
A..
Grease Gun ............................................... 1
B..
Hydraulic Coupler with Extension .............. 1
Operation
To improve tool lifespan, use a filter/lubricator/
regulator setup, as shown in
Figure 2
.
Otherwise, lubricate multiple times daily with 2–3
drops of pneumatic tool oil. Place the oil directly
into the air fitting, as shown in
Figure 3
.
Figure 1..
Model H0580.
Figure 3..
Lubricating directly into air fitting.
If you need help with your new pneumatic tool,
call our Tech Support at: (570) 546-9663.
COPyrIGHT © MAy, 2008 By GrIzzLy INduSTrIAL, INC.
WArnIng: nO pOrtIOn OF thIS mAnuAl mAy Be reprOduced In Any ShApe
Or FOrm WIthOut the WrItten ApprOvAl OF grIzzly InduStrIAl, Inc..
#jM10671 PrINTEd IN TAIWAN
eye InJury hAzArd!
Always wear safety glasses
during use to prevent
serious personal injury..
InJury hAzArd!
When servicing, always dis-
connect tool from air to pre-
vent unexpected operation..
150 pSI
mAX AIr preSSure!
exceeding this pSI may
result in injury/tool damage..
Quick
Connector
Quick
Coupler
Air Hose
Quick
Coupler
Quick
Connector
Lubricator
Filter
Regulator
Air
Compressor
Your
Tool
Figure 2..
Installing a filter/lubricator/regulator to
improve the lifespan of your tool.
mOdel h0580
pneumAtIc greASe
gun
InStructIOn Sheet
Hydraulic Coupler Extension
Head
Assembly
Cartridge Body
