Product Information
•
6,000 RPM
•
Requires 90 PSI
•
Requires 12 CFM
•
Requires 5" hook and loop sanding disc
•
1
/
4
" NPT air inlet
•
Weighs 4 lbs.
Inventory
A.
Air Sander ....................................................1
B.
Plastic Hose .................................................1
C.
Dust Collection Bag ......................................1
D.
Wrench .........................................................1
MODEL H0584
DUAL ACTION SANDER
INSTRUCTION SHEET
EYE INJURY HAZARD!
Always wear safety glasses
when using this tool to
prevent serious personal
injury.
INJURY HAZARD!
Always disconnect tool from
air to prevent unexpected
operation during service.
DUST HAZARD!
Always wear respirator when
using this tool.
Figure 1
.
Model H0584 inventory.
Assembly
To assemble the Model H0584:
1.
Install a
1
⁄
4
" NPT male quick-connect fitting
(not included) into the sander hose.
2.
Attach a 5" hook and loop sanding disc to the
sanding pad as shown in
Figure 2
.
A
B
C
D
Figure 2.
Attaching sanding disc.
COPYRIGHT © JUNE, 2006 BY GRIZZLY INDUSTRIAL, INC.
WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE
OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.
#BL8321 PRINTED IN TAIWAN
DO NOT EXCEED 120 PSI!
Personal injury could
occur.
Summary of Contents for H0584
Page 4: ......
