H0599 18V Cordless Cutting Tool
-1
-
For Your Own Safety Read Instruction Manual
Before Operating This Equipment
Indicates an imminently hazardous situation which, if
not avoided, WILL result in death or serious injury.
Indicates a potentially hazardous situation which, if
not avoided, COULD result in death or serious injury.
Indicates a potentially hazardous situation which, if
not avoided, MAY result in minor or moderate injury.
It may also be used to alert against unsafe practices.
This symbol is used to alert the user to useful information
about proper operation of the equipment.
The purpose of safety symbols is to attract your attention to possible hazardous
conditions. This manual uses a series of symbols and signal words which are
intended to convey the level of importance of the safety messages. The progres-
sion of symbols is described below. Remember that safety messages by them-
selves do not eliminate danger and are not a substitute for proper accident pre-
vention measures.
NOTICE
Safety Instructions For Power Tools
5.
KEEP CHILDREN AND VISITORS
AWAY
. All children and visitors
should be kept a safe distance from
work area.
6.
MAKE WORK SHOP CHILD
PROOF
with padlocks, master
switches, or by removing starter
keys.
7.
DON’T FORCE TOOL
. It will do the
job better and safer at the rate for
which it was designed.
8.
USE RIGHT TOOL.
Don’t force tool
or attachment to do a job for which it
was not designed.
1.
KEEP ALL SAFETY DEVICES IN
PLACE
and in working order.
2.
REMOVE ADJUSTING KEYS AND
WRENCHES
. Form habit of check-
ing to see that keys and adjusting
wrenches are removed from tool
before turning on
.
3.
KEEP WORK AREA CLEAN
.
Cluttered areas and benches invite
accidents.
4.
DON’T USE IN DANGEROUS
ENVIRONMENT
. Don’t use power
tools in damp or wet locations, or
where any flammable or noxious
fumes may exist. Keep work area
well lighted.
SAFETY
