background image

For Your Own Safety Read Instruction Manual

Before Operating This Equipment

Indicates an imminently hazardous situation which, if
not avoided, WILL result in death or serious injury.

Indicates a potentially hazardous situation which, if
not avoided, COULD result in death or serious injury.

Indicates a potentially hazardous situation which, if
not avoided, MAY result in minor or moderate injury.
It may also be used to alert against unsafe practices.

This symbol is used to alert the user to useful information
about proper operation of the equipment.

The purpose of safety symbols is to attract your attention to possible hazardous

conditions. This manual uses a series of symbols and signal words which are
intended to convey the level of importance of the safety messages. The progres-
sion of symbols is described below. Remember that safety messages by them-
selves do not eliminate danger and are not a substitute for proper accident pre-
vention measures.

NOTICE

General Safety Instructions

1. 

KEEP ALL SAFETY DEVICES IN
PLACE

and in working order.

2. 

REMOVE ADJUSTING KEYS AND
WRENCHES

. Form habit of check-

ing to see that keys and adjusting

wrenches are removed from winch

before operation.

3. 

KEEP CHILDREN AWAY.

All chil-

dren should be kept at a safe dis-

tance from winch.

4.

DO NOT USE UNDER THE INFLU-
ENCE OF DRUGS OR ALCOHOL.

5.

NEVER ALLOW UNTRAINED
USERS TO RUN THIS WINCH
WHILE UNSUPERVISED.

SAFETY

6.

WEAR PROPER APPAREL.

Do

not wear loose clothing, gloves,

neckties, rings, bracelets, or other

jewelry which may get caught in

moving parts. Non-slip footwear is

recommended. Wear protective

hair covering to contain long hair.

7.

ALWAYS USE SAFETY GLASS-
ES.

Everyday eyeglasses only

have impact resistant lenses, they

are NOT safety glasses.

8.

IF YOU ARE UNSURE OF THE
INTENDED OPERATION, STOP
USING THE WINCH.

H0937 Electric Winch

-1

-

Summary of Contents for H0937

















Reviews: