H3390 Wet Tile Saw
-7-
Grounding
Extension Cord
Reduce the risk of elec-
trocution by keeping all
connections dry and off
the ground. DO NOT
touch plugs with wet
hands. Failure to follow
these warning could
result in serious injury.
NOTICE
The wire on the power cord with green or
green and yellow striped insulation is the
grounding conductor.
In the event of an electrical short, grounding pro-
vides electric current a path of least resistance to
reduce the risk of electrical shock to the operator.
Ground the power cord and this machine in accor-
dance with all local codes and ordinances.
Operating this machine when it is not properly
grounded can result in electric shock or electro-
cution.
No single list of electrical guidelines can
be comprehensive for all shop environ-
ments. Operating this machinery may
require additional electrical upgrades spe-
cific to your machine and shop environ-
ment. It is your responsibility to make sure
your electrical systems comply with all
local electrical codes and ordinances.
Only use extension cords that are intended for
outdoor use. These types of extension cords are
designated with a label stating, “Acceptable for
use with outdoor appliances; store indoors when
not in use.” Refer to the chart in
Section 1: Safety
Instructions
to determine the minimum gauge for
the extension cord. Always repair or replace
extension cords when they become worn or dam-
aged.
Summary of Contents for H3390
Page 27: ...22 H3390 Wet Tile Saw 61 70 65 66 68 67 64 63 62 60 69...
Page 29: ...24 H3390 Wet Tile Saw NOTES...
Page 30: ...H3390 Wet Tile Saw 25 NOTES...
Page 34: ......
