Model H7673 HVLP Spray Gun
-10
-
SECTION 4: OPERATIONS
Spraying
The Model H7673 HVLP spray gun is
designed to spray low to medium solid
materials, like lacquers, stains, primers,
multi-component paints, acrylics, epoxies
etc. It is ideal for auto body touch-ups,
woodworking projects, or projects with
hard to reach areas. It is not for use with
any waterborne material.
To use your spray gun:
1.
Read and follow the material manufac-
turer's instructions for spraying, mixing,
safety, disposal, and any other instruc-
tion on the label or Material Safety Data
Sheet (MSDS).
2.
Ensure the cup is securely tightened
and all other fittings are secure to avoid
air leaks or material spills.
3.
Set the inlet air pressure (the air com-
ing to the spray gun) to the lowest
pressure recommended in
Tool Data
on
Page 7
or to the material manufac-
turer's recommendations.
4.
Adjust the atomizing cap to vertical or
horizontal. See
Atomizing Cap and
Fan Adjustments
on
Page 12
for fur-
ther explanation.
5.
Fill the cup with material.
6
. Trial and error are necessary to achieve
the results you want along with a fair
amount of practice. Test your material
flow and spray pattern on a piece of
cardboard or some scrap of material
similar to your project.
EXPLOSION HAZARD! DO NOT
smoke or have any source of flame
or spark near spraying. Vapors will
explode if ignited.
RESPIRATORY HAZARD! Always use
respirator rated for organic vapor
and solvent use when using spray
equipment. Failure to protect your
lungs can lead to respiratory illness
and nervous system damage.
TOXIC FUMES! Always use an
approved spray booth or well ven-
tilated area when spraying. NEVER
spray in an confined space where
toxic fumes and flammable vapors
can accumulate to deadly levels.
Summary of Contents for H7673
Page 2: ......
