Model H8224 HVLP Spray Gun
-3
-
INTRODUCTION
The specifications, details, and photographs
in this manual represent the Model H8224
as supplied when the manual was prepared.
However, owing to Grizzly’s policy of
continuous improvement, changes may be
made at any time with no obligation on the
part of Grizzly.
If you have any comments regarding this
manual, please write to us at the following
address:
Grizzly Industrial, Inc.
C/O Technical Documentation
P.O. Box 2069
Bellingham, WA 98227-2069
Email: manuals@grizzly.com
Most importantly, we stand behind our
tools. If you have any service questions or
parts requests, please call or write us at
the location listed below.
Grizzly Industrial, Inc.
1203 Lycoming Mall Circle
Muncy, PA 17756
Phone: (570) 546-9663
Fax: (800) 438-5901
E-Mail: techsupport@grizzly.com
Web Site: http://www.grizzly.com
Foreword
Specifications
Cup Size ............................................120cc
Feed Type .......................................Gravity
Fluid Tip Size ................................... 0.8mm
Air Consumption .................... 4.2–7.1 CFM
Operating Pressure Range ........ 44–58 PSI
Max. Air Pressure .......................... 120 PSI
Cup Material .....................................Plastic
Pattern Width ......... 7
1
⁄
8
"-9
3
⁄
4
" (180–250mm)
Body Material ............................. Aluminum
Air Inlet Size ...................................
1
⁄
4
" NPT
Read the manual before operation.
Become familiar with this tool, its
safety instructions, and its operation
before beginning any work. Serious
personal injury may result if safety
or operational information is not
understood or followed.
Summary of Contents for H8224
Page 16: ......
