Model H8232 3-Piece Framing/Finish/Palm Nailer Kit
-2
-
10. USE PROPER AIR HOSE
for
the tool. Make sure your air hose
is in good condition and is long
enough to reach your work without
stretching.
11. WEAR PROPER APPAREL.
Do
not wear loose clothing, gloves,
neckties, rings, bracelets, or other
jewelry which may get caught in
moving parts. Non-slip footwear is
recommended. Wear a protective
hair covering to contain long hair.
12. ALWAYS
USE
SAFETY
GLASSES.
Also use a face or
dust mask if cutting operation is
dusty. Everyday eyeglasses only
have impact resistant lenses, they
are NOT safety glasses.
13. WEAR APPROVED HEARING
PROTECTION.
Air escaping from
pneumatic tools can exceed safe
exposure limits and may cause
hearing damage with prolonged
exposure.
14. SECURE WORK.
Use clamps or a
vise to hold work when practical. It
is safer than using your hand and
frees both hands to operate tool.
15. MAINTAIN TOOLS WITH CARE.
Keep tools lubricated and clean
for best and safest performance.
Follow instructions for lubricating
and changing accessories.
16. REDUCE
THE
RISK
OF
UNINTENTIONAL FIRING.
Do not
carry tool with hand on trigger and
always disconnect from air when
not in use.
17. DISCONNECT TOOLS
before
servicing, changing accessories, or
moving to another location.
18. DO NOT OVERREACH.
Keep
proper footing/balance at all times.
19. USE
THE
RECOMMENDED
ACCESSORIES.
Consult owner’s
manual
for
recommended
accessories. The use of improper
accessories may cause risk of
injury.
20. CHECK FOR DAMAGED PARTS
BEFORE USING.
Check for binding
and alignment of parts, broken
parts, part mounting, loose bolts,
and any other conditions that may
affect machine operation. Repair or
replace damaged parts.
21. NEVER LEAVE UNATTENDED
TOOL CONNECTED TO AIR.
Disconnect the air hose and do not
leave tool until it is relieved of any
built up pressure.
22. NEVER ALLOW UNTRAINED
USERS TO USE THIS TOOL
WHILE UNSUPERVISED.
23. IF YOU ARE UNSURE OF THE
INTENDED OPERATION, STOP
USING TOOL.
Seek formal training
or research books or magazines
that specialize in pneumatic tools.
24. BE AWARE OF HOSE LOCATION
WHEN
USING
PNEUMATIC
TOOLS.
Hoses can easily become a
tripping hazard when laid across the
floor or spread out in a disorganized
fashion.
Safety Instructions for Pneumatic Tools
