For questions or help with this product contact Tech Support at (570) 546-9663 or techsupport@grizzly.com
MODEL T10499/T10500
PORTABLE
BLADE WELDER
INSTRUCTIONS
Copyright © ApriL, 2012 By grizzLy industriAL, inC.
WARNINg: NO PORTION Of ThIS MANUAL MAy BE REPRODUCED IN ANy ShAPE
OR fORM WIThOUT ThE WRITTEN APPROvAL Of gRIzzLy INDUSTRIAL, INC.
#ts14909 printed in tAiWAn
Introduction
this portable blade welder can cut, weld, anneal,
and grind bandsaw blades, which is commonly
done in the following situations:
•
to re-join a blade that has been purposely
cut for making an internal contour cut.
•
to repair a broken blade that is still sharp and
useful.
•
to fabricate a new blade from bulk blade
material.
hot sparks from the welding process can
damage your eyes and skin. During welding
operations, always wear safety goggles and
protective gear, and keep the spark deflec-
tor over the welding clamps to reduce your
risk.
Specifications
T10499:
range of Blade Widths ............................
1
⁄
8
" –
1
⁄
2
"
range of Blade thickness ..............0.02"–0.035"
power supply requirement ..........115V, 15 Amps
Welding power........................................ 1.2 KVA
shipping Weight ........................................50 lbs.
T10500:
range of Blade Widths ............................
3
⁄
8
" –
3
⁄
4
"
range of Blade thickness ..............0.02"–0.035"
power supply requirement .........230V, 20 Amps
Welding power........................................ 4.2 KVA
shipping Weight ........................................69 lbs.
figure 1. Blade Welder.
