Model T10824 (Mfd. Since 07/14)
-15-
SECTION 3: SETUP
Unpacking
Inventory
Your machine was carefully packaged for safe
transportation. Remove the packaging materials
from around your machine and inspect it. If you
discover any damage, please call us immediately
at (570) 546-9663 for advice.
Save the containers and all packing materials for
possible inspection by the carrier or its agent.
Otherwise, filing a freight claim can be difficult.
When you are completely satisfied with the condi-
tion of your shipment, inventory the contents.
The following is a list of items shipped with your
machine. Before beginning setup, lay these items
out and inventory them.
If any non-proprietary parts are missing (e.g. a
nut or a washer), we will gladly replace them; or
for the sake of expediency, replacements can be
obtained at your local hardware store.
Main Inventory (Figure 6)
Qty
A. Track Saw ................................................... 1
B. Blades (one shown installed) ..................... 4
C. Hex Wrench 5mm ....................................... 1
D. Spanner Wrench 24mm ............................. 1
A
B
C
D
Figure 6. Model T10824 inventory.
SUFFOCATION HAZARD!
Keep children and pets away
from plastic bags or packing
materials shipped with this
machine. Discard immediately.
NOTICE
If you cannot find an item on this list, care-
fully check around/inside the machine and
packaging materials. Often, these items get
lost in packaging materials while unpack-
ing or they are pre-installed at the factory.
Summary of Contents for T10824
Page 32: ......
