Model T1239 (Mfd. Since 09/17)
-9
-
Assembly
3.
Press sanding head lock forward to
secure it in place (see
Figure 4).
Figure 4. Locking sanding head in place.
4.
Apply appropriate sanding pad to
sanding head by aligning dust holes
and firmly pressing each together.
5.
Loosen sander dust collar (see
Figure 5A) and insert extension tube
collar, making sure not to exceed
"Max" line on extension tube (see
Figure 5A). Ensure extension tube
handle (see
Figure 5B) is aligned
with handle on sander assembly.
Note:
Ensure extension tube collar
is fully seated against sander dust
collar.
To assemble drywall sander:
1.
Remove sander from case, unfold
sander assembly (see
Figure 2), and
lock assembly together.
Figure 2. Locking sander assembly
together.
Lock
2.
Choose appropriate sanding head
for operation, and align gear key
receiver on motor with gear key on
sanding head (see
Figure 3).
Figure 3. Sanding head key.
Key
Receiver
Gear Key
Sanding
Head
20
22
21
Figure 5. Extension tube connected.
Max
Line
Sander
Dust Collar
Extension
Tube Collar
Handles
B
A
Extension Tube
Head
Lock
Summary of Contents for T1239
Page 20: ......
