Model T27338 (Mfd. Since 01/15)
-10
-
SECTION 4: OPERATIONS
If you have never used this type
of tool or equipment before, WE
STRONGLY RECOMMEND that you
read books, trade magazines, or get
formal training before beginning any
projects. Regardless of the content
in this section, Grizzly Industrial
will not be held liable for accidents
caused by lack of training.
ACCIDENTAL
START HAZARD!
Disconnect before
service or fastener
replacement.
AIR PRESSURE
HAZARD!
Never exceed max
PSI rating for tool.
EYE/EAR INJURY
HAZARD!
Wear protective
equipment when
using this tool.
Deflection due to material irregulari-
ties can cause puncture injuries to
improperly placed hands or body
parts. Always position hands and
body away from fastener trajectory
and deflection paths.
Loading Nailer
The Model T27338 shoots both nails and
staples.
Nail Replacement Guidelines
16 Ga.
L- or T-Cleat Nail
1
1
/
2
"–2" Long
(100 Pc. Capacity)
15.5 Ga.
1
/
2
" Crown Staple
1
1
/
2
"–2" Long
(120 Pc. Capacity)
16 Ga.
L- or T-Cleat Nail
1
1
/
2
"–2" Long
(100 Pc. Capacity)
15.5 Ga.
1
/
2
" Crown Staple
1
1
/
2
"–2" Long
(120 Pc. Capacity)
Note: Use 1
1
⁄
2
" nails to install
1
⁄
2
"- or
5
⁄
8
"-
thick hardwood flooring. Use 2" nails to
install
3
⁄
4
"- or
25
⁄
32
"-thick hardwood flooring.
Staple Replacement Guidelines
Figure 7. Location of pusher, lock button.
Lock Button
Pusher
To load nailer:
1. DISCONNECT NAILER FROM AIR
SOURCE!
2. Pull magazine pusher back completely,
and secure pusher with lock button, as
shown in
Figure 7.
Summary of Contents for T27338
Page 28: ......
