For questions or help with this product contact Tech Support at (570) 546-9663 or techsupport@grizzly.com
MODEL T28170
TOOL STAND
INSTRUCTIONS
For Models Mfd. Since 10/17
COPYRIGHT © NOVEMBER, 2017 BY GRIZZLY INDUSTRIAL, INC.
NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE
OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.
#ES19303 PRINTED IN CHINA
Introduction
The Model T28170 Tool Stand is designed to pro-
vide a stable platform for mounting machinery and
equipment.
V1.11.17
Description Qty
A. Legs ........................................................... 4
B. End Supports ............................................. 4
C. Side Supports ............................................. 4
D. Foot Brackets ............................................. 4
E. Adjustable Feet M12-1.75 x 120mm
w/ Hex Nuts M12-1.75 ................................. 4
F. Hardware Bag (Not Shown)
—Carriage Bolts M8-1.25 x 20mm ........... 48
—Flange Nuts M8-1.25 ............................ 48
—Flange Nut M12-1.75 ............................... 4
—Hex Nuts M12-1.75 .................................. 4
Inventory
Specifications
•
Footprint (Length x Width) ..............28" x 20"
•
Height ...............................................31"–39"
•
Maximum Weight Capacity ............. 400 lbs.
•
Approximate Assembly Time .......30 Minutes
Needed for Assembly
•
Open-End Wrench or Socket 13mm .......... 1
•
Open-End Wrench 15mm or
Adjustable Wrench ..................................... 2
•
90° Square ................................................. 1
•
Level 3' ....................................................... 1
Figure 2. Inventory.
B
C
D
E
A
Figure 1. Model T28170 Tool Stand.
