Grizzly T28192, Owner'S Manual

Model T28192 (Mfd. Since 04/18)

-7-

ELECTRICAL EQUIPMENT INJURY RISKS. You 
can be shocked, burned, or killed by touching live 
electrical  components  or  improperly  grounded 
machinery. To reduce this risk, only allow qualified 
service  personnel  to  do  electrical  installation  or 
repair work, and always disconnect power before 
accessing or exposing electrical equipment.

DISCONNECT POWER FIRST.  Always  discon-

nect machine from power supply BEFORE making 

adjustments, changing tooling, or servicing machine. 

This prevents an injury risk from unintended startup 

or contact with live electrical components.

EYE PROTECTION. Always wear ANSI-approved 

safety glasses or a face shield when operating or 

observing  machinery  to  reduce  the  risk  of  eye 

injury or blindness from flying particles. Everyday 

eyeglasses are NOT approved safety glasses.

OWNER’S MANUAL. Read and understand this 
owner’s manual BEFORE using machine. 

TRAINED OPERATORS ONLY. Untrained oper-

ators  have  a  higher  risk  of  being  hurt  or  killed. 

Only  allow  trained/supervised  people  to  use  this 

machine.  When  machine  is  not  being  used,  dis-

connect  power,  remove  switch  keys,  or  lock-out 

machine to prevent unauthorized use—especially 

around children. Make your workshop kid proof!

DANGEROUS ENVIRONMENTS. Do  not  use 

machinery in areas that are wet, cluttered, or have 

poor lighting. Operating machinery in these areas 

greatly increases the risk of accidents and injury.

MENTAL ALERTNESS REQUIRED. Full mental 

alertness is required for safe operation of machin-

ery. Never operate under the influence of drugs or 

alcohol, when tired, or when distracted.

For Your Own Safety, Read Instruction 

Manual Before Operating This Machine

The purpose of safety symbols is to attract your attention to possible hazardous conditions. 

This manual uses a series of symbols and signal words intended to convey the level of impor-

tance of the safety messages. The progression of symbols is described below. Remember that 

safety messages by themselves do not eliminate danger and are not a substitute for proper 

accident prevention measures. Always use common sense and good judgment.

Indicates a potentially hazardous situation which, if not avoided, 
MAY result in minor or moderate injury. It may also be used to alert 
against unsafe practices.

Indicates a potentially hazardous situation which, if not avoided, 
COULD result in death or serious injury.

Indicates an imminently hazardous situation which, if not avoided, 
WILL result in death or serious injury.

This symbol is used to alert the user to useful information about 
proper operation of the machine.

NOTICE

Safety Instructions for Machinery

SECTION 1: SAFETY