-4-
Model T28366 (Mfd. Since 04/18)
Controls &
Components
Refer to
Figures 1–3 and the following descrip-
tions to become familiar with the basic controls
and components of this machine. Understanding
these items and how they work will help you
understand the rest of the manual and stay safe
when operating this machine.
To reduce your risk of
serious injury, read this
entire manual BEFORE
using machine.
A. Start Button: Starts blade rotation and
activates coolant pump.
B. Lever Arm: Pull down to lower blade.
C. Emergency Stop Button: Cuts power to
motor and remains depressed until reset.
Twist clockwise to reset.
D. Master Power Switch: Supplies power to
machine for operation.
E. Depth Stop: Stops blade at specific depth to
produce multiple same-depth cuts.
F. Coolant Flow Control Valve: Enables flow
of coolant from reservoir to nozzle.
G. Coolant Reservoir: Houses coolant and
coolant pump and also performs coolant
filtration.
H. Vise Jaws: Independently adjustable vise
jaws with beveled edges for saw blade
clearance.
I. Vise Handwheel: Opens and closes self-cen-
tering vise jaws to clamp the workpiece.
J. Miter Lock Lever: Releases or locks rotation
of saw base for angled cuts.
Figure 1. Saw headstock and control box.
A
C
D
B
E
Figure 2. Coolant system.
G
F
Figure 3. Saw controls.
H
I
J
