background image

-4-

Model T28798 (Mfd. Since 12/18)

Page 1 of 2

Model T28798

MODEL T28798 METAL DUST COLLECTOR

Customer Service #: (570) 546-9663 · To Order Call: (800) 523-4777 · Fax #: (800) 438-5901

Product Dimensions:

Weight  ........................................................................................................................................................................... 183 lbs.
Width (side-to-side) x Depth (front-to-back) x Height  .................................................................................20 x 28-1/2 x 43 in.
Footprint (Width x Depth) .....................................................................................................................................20 x 28-1/2 in.

Shipping Dimensions:

Type ................................................................................................................................................................... Cardboard Box
Content .......................................................................................................................................................................... Machine
Weight ............................................................................................................................................................................ 199 lbs.
Length x Width x Height .....................................................................................................................................42 x 27 x 22 in.
Must Ship Upright .................................................................................................................................................................Yes

Electrical:

Power Requirement ........................................................................................................................ 240V, Single-Phase, 60 Hz
Full-Load Current Rating ........................................................................................................................................................ 9A
Minimum Circuit Size ........................................................................................................................................................... 15A
Connection Type ..................................................................................................................................................... Cord & Plug
Power Cord Included ............................................................................................................................................................Yes
Power Cord Length ...............................................................................................................................................................6 ft.
Power Cord Gauge ....................................................................................................................................................... 14 AWG
Plug Included .......................................................................................................................................................................6-15
Switch Type .........................................................................................START/STOP Paddle w/Magnetic Overload Protection

Motor:

Main

Horsepower ............................................................................................................................................................1.5 HP
Phase .......................................................................................................................................................... Single-Phase
Amps ............................................................................................................................................................................ 9A
Speed ...............................................................................................................................................................3450 RPM
Type ................................................................................................................................ TEFC Capacitor-Start Induction
Power Transfer ...............................................................................................................................................Direct Drive
Bearings ............................................................................................................... Shielded and Permanently Lubricated
Centrifugal Switch/Contacts Type ........................................................................................................................External

Main Specifications:

Operation Information

Dust Collector Type ..................................................................................................................................................Metal
Airflow Performance ...........................................................................................................................................650 CFM
Max. Static Pressure (at 0 CFM) ...........................................................................................................................10.8 in.
Main Inlet Size ............................................................................................................................................................6 in.
Adapter Inlet Included .................................................................................................................................................Yes
Adapter Inlet Type .................................................................................................................................................. Y-Inlet
Adapter Inlet Size .......................................................................................................................................................4 in.
Number of Adapter Inlets ................................................................................................................................................2
Max. Material Collection Capacity .................................. 1 cu. ft. (Main Compartment), 0.22 cu.ft. (Filter Compartment)

Summary of Contents for T28798





































Reviews: