background image

Model T28798 (Mfd. Since 12/18)

-5-

Model T28798

Page 2 of 2

Filter Information

Number of Filters .............................................................................................................................................................3
Total Filter Surface Area ..................................................................................................................................6.11 sq. ft.
First-Stage Filter Type ............................................................................................................Stainless-Steel Mesh Filter
First-Stage Filter Rating .................................................................................................................................. 30 Microns
First-Stage Filter Size (Length x Width x Thickness) ................................................................. 19-1/4 x 15-1/4 x 1/8 in.
Second-Stage Filter Type ..................................................................................................................Active Carbon Filter
Second-Stage Filter Rating ............................................................................................................................... 5 Microns
Second-Stage Filter Size (Length x Width x Thickness) ............................................................ 19-1/4 x 15-1/4 x 7/8 in.
Third-Stage Filter Type ...................................................................................................................... Pleated Micro-Filter
Third-Stage Filter Rating .....................................................................................................................................1 Micron
Third-Stage Filter Size (Length x Width x Thickness) ................................................................ 19-1/4 x 15-1/4 x 7/8 in.

Impeller Information

Impeller Type .................................................................................................................................................... Radial Fin
Impeller Size .......................................................................................................................................................12-3/4 in.
Impeller Blade Thickness ........................................................................................................................................1/4 in.

Construction

Base ..........................................................................................................................................................................Steel
Frame ........................................................................................................................................................................Steel
Side Walls .................................................................................................................................................................Steel
Collection Drawer ......................................................................................................................................................Steel
Caster ..................................................................................................................................................................... Plastic
Impeller ..............................................................................................................................................................Aluminum 
Blower Housing .........................................................................................................................................................Steel
Paint Type/Finish ......................................................................................................................................Powder Coated

Other Specifications:

Country of Origin ............................................................................................................................................................. Taiwan
Warranty ........................................................................................................................................................................... 1 Year
Approximate Assembly & Setup Time ...................................................................................................................... 30 Minutes
Sound Rating .................................................................................................................................................................... 82 dB
Serial Number Location ..................................................................................................................................Machine ID Label
ISO 9001 Factory ................................................................................................................................................................... No
Certified by a Nationally Recognized Testing Laboratory (NRTL) ......................................................................................... No

Features:

3-Stage Filter System
Aluminum Impeller
Caster Wheels for Easy Movement
Removable Chip Clean-Out Drawer
6" Inlet with Dual 4" Y-Inlet Adapter

Summary of Contents for T28798





































Reviews: