-14-
Model T31636 (Mfd. Since 02/20)
11. Install (2)
1
⁄
4
"-20
x
3
⁄
4
" carriage bolts in the
center slot of infeed fence (see
Figure 16).
Figure 16. Carriage bolts installed in fence.
Carriage Bolts
Infeed Fence
x 2
9. Insert (2)
1
⁄
4
"-20
x
3
⁄
4
" T-bolts (see
Figure 14)
in scaled table T-slots and through fence
base, as shown below.
Figure 14. T-bolts inserted through table and
fence base.
Fence
Base
T-Bolt
(1 of 2)
x 2
7. Insert mounting plate in table, as shown in
Figure 12.
Figure 12. Mounting plate installed in table.
Straightedge
Mounting
Plate
Table Surface
Figure 13. Pattern for aligning mounting plate.
8. Lay straightedge across mounting plate, table
insert, and table surfaces in pattern shown in
Figure 13. Adjust set screws (see Figure 12)
so that ends of straightedge lay flat on table
surface at all positions of pattern.
IMPORTANT: Mounting plate and table
surface must be aligned evenly to ensure
workpiece does not catch on mounting plate
or table surface and kick back.
Set Screws
(1 of 4)
10. Secure fence base by threading (2) 8-lobe
knobs and (2)
1
⁄
4
" flat washers onto T-bolts
from
Step 9 (see Figure 15).
Figure 15. Fence base secured to table.
x 2
Knob & Flat Washer
(1 of 2)
Summary of Contents for T31636
Page 36: ......