Model T31636 (Mfd. Since 02/20)
-15-
15. Attach dust hood to back of fence base by
removing the two lock knobs and washers
shown in
Figure 19, and re-installing through
holes in dust hood.
Figure 19. Dust hood attached to fence base.
Fence Base
Dust
Hood
x 2
12. Align carriage bolts with holes in fence base
(see
Figure 17) and install infeed fence.
Figure 17. Infeed fence installed on fence base.
Infeed Fence
Fence Base
Carriage Bolts
14. Repeat Steps 11–13 to install outfeed fence
on opposite side of base.
16. Press (2) fence end caps into position, as
shown in
Figure 20, with flat side forward.
Figure 20. End caps pressed into fences.
End Cap
(1 of 2)
13. Secure infeed fence to base with (2)
1
⁄
4
"
flat washers and (2) 8-lobe knobs (see
Figure 18).
Figure 18. Infeed fence secured to base.
x 2
Fence Base
Knob & Flat Washer
(1 of 2)
Knob & Flat Washer
(1 of 2)
Summary of Contents for T31636
Page 36: ......