Figure7. Connection scheme for Toyota/Lexus/Scion and Honda/Acura (03 and up)
8. If you are using USB Flash Drive – set up the folders and playlists according to the
section 3.3.4.
9. If you are using Android Smart phone:
a) Download and install
AALinQ App
from Google Play Store.
b) Setup the playlists and folders according to the
section 3.2.1.
10. Connect the USB Flash Drive or Android Smartphone via USB port to GROM-AND2 module.
11. Turn your car stereo on and switch it over to CD Changer mode using the Disc/Mode/CD/AUX buttons on your
car stereo (depending on the stereo type). You may have to press
CD/Disc twice
to access CD Changer mode.
Your display should now show Disc 1, Track 01 or similar.
12. Play some music from your USB device or Android Smartphone (
folders or playlists need to be setup
). You
should hear the sound coming from the car stereo speakers.
13. Once you confirmed the operation of the interface, continue with the installation. If you have trouble with the
installation, please see our
troubleshooting section.
14. Find a place for the GROM-AND2 adapter. In many cars, the dash offers sufficient room for installation.
Note
:
Make sure you mount the GROM-AND2 adapter in a place with sufficient room so that, when you remount the
car stereo, you do not break the adapter.
We strongly recommend you mount unit in easy access location.
15. You may use the glove box or other spaces on the dash to direct the USB cables away from the unit.
16. Remount your car stereo, making sure it fits securely.
Congratulations!
You have installed the GROM-AND2 adapter and may use it immediately with your Android
Smartphone, USB device, MP3 player, or iPod.
2.4 Installation Troubleshooting
Symptom
Cause
Remedy
Stereo is not
recognizing the GROM
-AND2 adapter
Some Honda, Toyota, and Lexus car
stereos have to be restarted before the
stereo catches the signal
After connecting the adapter, turn the
stereo on; turn the ignition off and then
back on
Stereo is not
recognizing the
GROM-AND2 adapter
External CD changer is present
Make sure to disconnect the external CD
changer
Rev. 1.2
6
