Email: HCM-EMEAsupport@grosvenortechnology.com
Telephone: +44 (0)1202 621711
Web: www.grosvenortechnology.com
EMEA HQ
sales@gtclocks.com
+1 (800) 989 5197
www.gtclocks.com
North America HQ
GT10S
Installation Guide
1.
Insert the key
2.
While pressing the key in
rotate clockwise
3.
Front panel bottom can
now be pulled forward
4.
When separated, lift front
panel to remove
Opening and fitting Front Panel to Back Panel
1
2
3
Installing the GT10S
Secure to a vertical surface
Before mounting the back panel first fit any Biometric Reader
options as these need access from the rear of the unit.
Bring in any cables through snip-out apertures (A or B). Cables may
be routed within the cabling cavity between the back panel and
mounting surface (C).
For installations in the USA the unit may be mounted over a
power outlet with PSU (wall wart) inside the case. For this type of
installation snip-out the large aperture (B)
Fix the back panel to a flat vertical surface at a height that will be
comfortable for users to see and touch the screen observing any
national regulations. Use suitable screws through any of the fixing
points (D) circled to firmly secure the device taking care to not over-
tighten the screws or distort the case.
Extension Modules e.g. EM-IO-USB-IT may be fitted in the area (E)
Fitting Reader Modules
IT series Proximity Reader Modules may be fitted using the two
mounting screws provided. Connect the ribbon cable and apply
power to the terminal.
The reader type will be automatically detected. Within the Settings
menu select Readers & peripherals to access the reader settings
page.
GT10S-A Configuration
To access the Settings menu
allow the Terminal to boot then
select ‘Admin’. A PIN is required
to enter setup mode, the default
is 1905. From the Apps menu
select ‘settings’ then select
‘Readers & peripherals’.
GT10S-L Configuration
Once the unit is fully booted,
the initial screen gives you
the opportunity to enter the
Terminal Setup
by pressing
the
Cog Icon
(bottom right of
screen).
D
D
D
D
D
D
D
D
E
C
A
B
The default
PIN is 1905
