Toughsat
T-100 Users Manual
Ground Control
- 12 -
DEPLOYING THE DISH
STEP 11
– DEPLOY THE DISH
. After GPS has been acquired by the system, (normally within 2 minutes), you may
press the “
Deploy
” button on the Toughsat controller, which will raise the system. If for any reason there is any
problem, press the “
STOP
” button to stop the unit from deploying. The dish will raise, rotate, and lock on satellite
normally in under 3.5 minutes. If there is a problem, make sure that all equipment lights are on.
Once all five lights are green on the front of the iDirect modem, the system is online and ready to use.