Toughsat
T-100 Users Manual
Ground Control
- 8 -
STEP 3
– Pull the pin the holds the front wheel jack against the trailer frame. Rotate it 90 degrees so that the jack
locks into place with the wheel side down. Carefully unlock the hitch from the ball.
STEP 4
– Begin to crank up the front of the trailer so that the hitch clears the 2” ball on the tow vehicle.
The trailer dolly is a good way of moving the trailer to a different location. Also note the trailer tongue itself may be
removed by unlocking the locking pin that holds it to the trailer frame. Removing the tongue may reduce theft of the
system, or allow other tongue configurations to quickly be used on the trailer.