P
AGE
13
OF
26
DGF100
reference
manual, rev 1, Feb 22, 2022
Ground
Fault
Systems
B.V.
5.
C
ATALOG
NUMBERS
DGF100
Ground Fault Protection unit with built-in 46 mm CS, 24 - 240 V ac or dc Control
Voltage, for use on 660 V maximum, 45-65 or 400 Hz power systems. Can be
expanded with external CS, remote Reset/Test pushbutton and DGF100 Display.
DGF100 Display
Digital Display Unit with LCD display and interconnecting cable, for use with DGF100
CS5-50
Zero sequence current sensor, 50 mm window, 500:1 ratio
CS5-65
Zero sequence current sensor, 65 mm window, 500:1 ratio
CS5-90
Zero sequence current sensor, 90 mm window, 500:1 ratio
CS5-150
Zero sequence current sensor, 150 mm window, 500:1 ratio
CS5-240
Zero sequence current sensor, 240 mm window, 500:1 ratio
CS5-1517
Zero sequence current sensor, 150 x 170 mm window, 500:1 ratio *
CS5-1025
Zero sequence current sensor, 100 x 250 mm window, 500:1 ratio *
CS5-1035
Zero sequence current sensor, 100 x 350 mm window, 500:1 ratio *
CS5-3030
Zero sequence current sensor, 300 x 300 mm window, 500:1 ratio *
CS5-2028
Zero sequence current sensor, 200 x 280 mm window, 500:1 ratio
CS10-95
Zero sequence current sensor, 95 mm window, 1000:1 ratio
CS10-144
Zero sequence current sensor, 144 mm window, 1000:1 ratio
CS10-240
Zero sequence current sensor, 240 mm window, 1000:1 ratio
CS10-1025
Zero sequence current sensor, 100 x 250 mm window, 1000:1 ratio *
CS10-1035
Zero sequence current sensor, 100 x 350 mm window, 1000:1 ratio *
CS10-2028
Zero sequence current sensor, 200 x 280 mm window, 1000:1 ratio
CS20-95
Zero sequence current sensor, 95 mm window, 2000:1 ratio
CS20-144
Zero sequence current sensor, 144 mm window, 2000:1 ratio
CS20-240
Zero sequence current sensor, 240 mm window, 2000:1 ratio
CS20-1025
Zero sequence current sensor, 100 x 250 mm window, 2000:1 ratio *
CS20-1035
Zero sequence current sensor, 100 x 350 mm window, 2000:1 ratio *
CS20-2028
Zero sequence current sensor, 200 x 280 mm window, 2000:1 ratio
CS100-95
Zero sequence current sensor, 95 mm window, 10.000:1 ratio
CS100-144
Zero sequence current sensor, 145 mm window, 10.000:1 ratio
CS100-240
Zero sequence current sensor, 240 mm window, 10.000:1 ratio
CS100-2028
Zero sequence current sensor, 200 x 280 mm window, 10.000:1 ratio
* These current sensors are also available as a split core version, which adds /S to the name, e.g. when
ordered the name changes to CS5-1517/S.
Note: all the CS5, CS10, CS20 and CS100 type Current Sensors are for use with Ground Fault Systems
devices only.
Back to External Current Sensor.
Back to Connections and precautions.
